Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car


Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
- Automatic transmission
   Specifications
   Search of malfunctions - the general information
   - Automatic transmission 722.5
      Removal, check of a state and installation of the converter of rotation (hydrotransformer)
      Removal and installation of the centrifugal regulator
      Removal and installation of the sensor switch of blocking of a starter (permission of start)
      Vacuum knot - installation details
      Removal, service and installation of the secondary pump (AT to No. 3652931)
      Removal and installation of a forward cover with the secondary pump
      Removal and installation of the LB3 piston
      Removal and installation of a back cover of transmission
      Dismantling and assembly of valvate assembly of AT
      Dismantling and assembly of transmission
      Installation and check of a gap in a multidisk brake of B3
      Measurement of a gap in B1 brake
      Coupling of the raising transfer
      Removal, installation and check of components of a brake of BS of the raising transfer and coupling of KS
      Dismantling and assembly of the coupling of a free wheeling
      Dismantling and assembly of planetary mechanisms
      Dismantling and assembly of coupling of K1
      Coupling of K2
      Gear shifting selector lever
   + Automatic transmission 722.6
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






Removal and installation of the sensor switch of blocking of a starter (permission of start)

Removal

Details of installation of the sensor switch of blocking of a starter

5 — the Clamp
6, 10 — Bolts
7 — the Nut
8 — the Contact socket of an electrical wiring

9 — Draft of switching
52 — the gear shifting Lever
54 — the Driving lever
S16/4 — the Switch of blocking of a starter


 PERFORMANCE ORDER

1. Disconnect from the sensor switch an electrical wiring (8).
2. Unhook draft (9), having disconnected a clamp (5).
3. Disconnect the lever of gear shifting (52), having turned off a nut (7) and a bolt (6).
4. Remove the switch of blocking of a starter (S16/4), having turned off bolts (10).

Installation

Installation is carried out as it should be, the return to removal.