| 1. Define distance of "a", having established a support (029) on the interfaced surface. By means of a caliper, measure distance from the outer edge before spring laying (85). |
|
| 2. Define distance of "b", having installed a support (029) on the piston of a multidisk brake (arrow). Measure distance to laying (11). A difference between these distances - a gap of "L".
|
|
| 3. Adjust a gap the "L" thickness of external disks (133b) of a brake. External disks (133b) happen the following thickness of 2.3, 2.8, 3.3 and 3.8 mm.
|
|
4. Grease a groove on the leader to a shaft (67). Establish the greased ring (9).
|
|
|