Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car


Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Gear shifting box
   Specifications
   Removal and installation of the transmission
   Forward cover of the transmission - an installation detail
   Removal and installation of a back cover of the transmission
   + RKPP 717.438
   - RKPP 717.454
      Removal and installation of the sensor of speed of the car (VSS)
      Removal and installation of a forward cover of the transmission
      Removal and installation of a back cover of the transmission
      Removal and installation of an intermediate case
      Replacement of an epiploon of a back cover of the transmission
      Removal and installation of shaft of the transmission
      Dismantling and assembly of an intermediate shaft
      Verification of dimensional characteristics of the transmission
      Replacement of conic roller bearings of an intermediate shaft
      Replacement of ball bearings of an intermediate shaft
      Adjustment of the mechanism of gear shifting
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






Replacement of an epiploon of a back cover of the transmission

Details of installation of an epiploon of a back cover of the transmission

Details of installation of an epiploon of a back cover of the transmission

2 — the Driveshaft
5, 21, 200a — Bolts
6, 20, 36 — Washers
7, 35, 88, 200 — Nuts

18 — an engine Support
19 — an engine Arm
56 — the Epiploon
87 — the Flange

Removal

Details of installation of an arm of a support of a suspension bracket of the power unit

18 — the Support of a suspension bracket of the power unit
19 — the Arm
21 — Fixing bolts
35 — the Fixing nut


 PERFORMANCE ORDER

1. Lift the transmission by means of a jack.
2. Turn off a nut of fastening of a support of the engine (35). Turn off bolts (21) with washers and remove an arm (19) together with a support of an engine mount (18).

3. Unscrew the driveshaft from the transmission. Turn off a bolt (8) of fastening of a shaft of a speedometer (9) and remove it.

4. Weaken adjusting plugs in a driveshaft flange. For this purpose use a drift with a diameter of 10 mm and about 150 mm long.

5. Weaken a nut of the driveshaft and move the driveshaft from a flange towards a back part of the car.

6. Turn off bolts of basic assembly (200a).

7. Turn off a nut of fastening of a flange of the transmission.

8. Remove a transmission flange.
9. Having hooked the screw-driver, take an epiploon from a transmission cover by means of the screw-driver.

Installation

Installation is carried out as it should be, the return to removal.