Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Gear shifting box
Specifications
Removal and installation of the transmission
Forward cover of the transmission - an installation detail
Removal and installation of a back cover of the transmission
+ RKPP 717.438
- RKPP 717.454
Removal and installation of the sensor of speed of the car (VSS)
Removal and installation of a forward cover of the transmission
Removal and installation of a back cover of the transmission
Removal and installation of an intermediate case
Replacement of an epiploon of a back cover of the transmission
Removal and installation of shaft of the transmission
Dismantling and assembly of an intermediate shaft
Verification of dimensional characteristics of the transmission
Replacement of conic roller bearings of an intermediate shaft
Replacement of ball bearings of an intermediate shaft
Adjustment of the mechanism of gear shifting
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Removal and installation of the sensor of speed of the car (VSS)
Models with VSS of mechanical type
Details of the VSS installation of mechanical type Details of the VSS installation of mechanical type
|
|
|
38 — Kosozubaya a speedometer drive gear wheel
38a — Laying |
56, 83 — Epiploons
84 — a speedometer drive Gear wheel
85 — the Cover |
Removal
|
|
| 1. Remove an epiploon (56) from a back cover of the transmission (82). |
|
| 2. Remove a kosozuby gear wheel of the drive of a speedometer (38) and laying (38a) from a back cover of the transmission (82). |
|
| 3. Take a cover (85) by means of a drift. Remove a gear wheel of a speedometer (84) from a back cover of the transmission (82). |
|
| 4. Remove a radial epiploon (83) from a back cover of the transmission (82). For simplification of its removal, screw M12 bolt in a radial epiploon and fix a bolt head in a vice. |
|
|
Installation
|
|
|
1. Press an epiploon against the stop. |
|
|
2. Establish a gear wheel of a speedometer (84) in a back cover of the transmission (82). Establish a cover (shooter) by means of a drift so that the gap between a gear wheel and a back cover of the transmission was equal to 0.5 mm.
|
|
|
3. Insert a kosozuby gear wheel of the drive of a speedometer (38) a facet towards the roller plug (shooter) and press laying (38a) in a back cover of the transmission (62).
4. Further installation is carried out as it should be, the return to removal.
|
|
Models with electronic VSS Details of installation of electronic VSS
|
|
|
38a — Laying
38b — the Rotor
38c — the Plug |
56 — the Epiploon
62b — the Inductive sensor
82c — the Sealing ring |
Removal
|
|
|
1. Remove a radial epiploon (56) from a back cover of the transmission (82). |
|
|
2. Remove laying (38a), a rotor (38b) and the plug (38c) from a back cover of the transmission (82). |
|
|
3. By means of a drift beat out a cover (02b) of the inductive sensor from a transmission cover. |
|
|
Installation
|
|
|
1. Carefully press a cover (82b) of the inductive sensor and a new sealing ring in a transmission cover by means of a drift. |
|
|
2. Further installation is carried out as it should be, the return to removal. |
|
|
|