Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car

Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Gear shifting box
   Specifications
   Removal and installation of the transmission
   Forward cover of the transmission - an installation detail
   Removal and installation of a back cover of the transmission
   - RKPP 717.438
      Removal and installation of an intermediate case
      Check of a gap of the leading and intermediate shaft
      Dismantling and assembly of the conducted shaft
      Removal and installation of leaders and the conducted gear wheels
      Replacement of the RKPP ball bearings with No. 6141001
      Replacement of conic roller bearings of the transmission to No. 6141000
      The gear shifting mechanism - details of installation of elements
   + RKPP 717.454
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

RKPP 717.438

Removal and installation of the sensor of speed of the car (VSS)

Models with electronic VSS

Removal

Details of installation of electronic VSS


38a — the Persistent washer 38b — the Rotor 38c — the Nave 50 — Sealing laying	82 — the Back cover of the transmission 83a — the Sealing ring 84b — the Cover L2 — the Electronic sensor of speed of the car

PERFORMANCE ORDER

1 Unscrew the sensor (L2).
2 Uncover (84a) the sensor (L2).
3 Disconnect a persistent washer (38a), a rotor (38b) and a nave (38c).

Installation

Installation is carried out as it should be, the return to removal.

Models with VSS of mechanical type

Removal

Details of the VSS installation of mechanical type


38 — Kosozubaya a speedometer gear wheel 38a — the Persistent washer 50 — Sealing laying 82 — the Back cover of the transmission	83 — the Radial epiploon 84 — the Leading gear wheel of a speedometer 85 — the Sealing cover

PERFORMANCE ORDER

1. Remove a back cover of the transmission.
2. Take a sealing cover (85).
3. Take the leading gear wheel of a speedometer (84).
4. Take a radial epiploon (83).
5. Remove a kosozuby gear wheel (38) and a persistent washer (33a).

Installation

Check of size of a gap between the leading gear wheel and a cover of the transmission

Installation is carried out as it should be, the return to removal. A gap between the leading gear wheel and a cover of the transmission of 0.5 mm.