| 1. On steering of the 1st version fix new laying (96a) on the lower shaft and record it. |
|
| 2. On steering of the 1st and 2nd versions at first wrap a nut (96) on the top steering shaft (70g). Establish the lower steering shaft on a nut (96) and wrap them together, continuing to rotate both parts until they are not blocked in shlitsevy connection. |
|
3. Turn the lower steering shaft (80a) so that the fork of the hinge was established down. Insert the adjusting tool (075) into a groove of the top shaft and establish a fork of the lower shaft (80a) so that it was established in parallel to "X" to the adjusting tool (075).
4. Establish a steering wheel on a steering shaft. Tighten a nut (96). |
|
| 5. On steering of the 1st version: block a nut (96) for what press laying (96a) in a groove over a nut. |
|