Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car

Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
- Gear shifting box
   Specifications
   Removal and installation of the transmission
   Forward cover of the transmission - an installation detail
   Removal and installation of a back cover of the transmission
   - RKPP 717.438
      Removal and installation of an intermediate case
      Check of a gap of the leading and intermediate shaft
      Dismantling and assembly of the conducted shaft
      Removal and installation of leaders and the conducted gear wheels
      Replacement of the RKPP ball bearings with No. 6141001
      Replacement of conic roller bearings of the transmission to No. 6141000
      The gear shifting mechanism - details of installation of elements
   + RKPP 717.454
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Check of a gap of the leading and intermediate shaft

Check of a gap of the leading and intermediate shaft


1a — the Ball bearing of the leading shaft 1b, 1c, 127 — Lock rings 2 — the Leading shaft 40 — the Intermediate shaft	92 — the Forward cover of the transmission 128 — the Ball bearing of an intermediate shaft S1 — the Gap of the leading shaft S2 — the Gap of an intermediate shaft

PERFORMANCE ORDER

1. Measure a gap between the ball bearing of the leading shaft and a forward cover of the transmission. The nominal size of gaps makes 0.1 mm.
2. Measure distance of "a" between an external ring of the bearing and the contact surface of the case of the transmission by means of a caliper.
3. Measure distance of "b" between a sealing surface of a cover of the transmission and a groove of the bearing by means of a caliper.
4. Calculation of thickness of laying is made as follows: Distance of "b" (6.1 mm) - Distance of "a" (5.2 mm) = the Difference (0.9 mm) - the Gap (0.1 mm) = the laying Thickness (0.8 mm). Laying 0.2, 0.3 and 0.5 mm thick is issued. 5. Insert laying into a forward cover of the transmission and fix them by means of lubricant. 6. Check a gap between the ball bearing of an intermediate shaft and a forward cover of the transmission. 7. Install an intermediate shaft with the ball bearing in the transmission case by means of the plastic hammer.
8. Measure distance "with" between an external ring of the bearing and the contact surface of the case of the transmission by means of a caliper.
9. Measure distance of "d" between a sealing surface of a forward cover of the transmission and a groove by means of a caliper.
10. Determine thickness of laying: Distance of "d" (5.8 mm) - Distance "with" (5.1 mm) = the Difference (0.7 mm) - the Gap (0.1 mm) = the laying Thickness (0.6 mm). Laying 0.2, 0.3 and 0.5 mm thick is issued. 11. Insert laying into a forward cover of the transmission of m fix them by means of lubricant.

Installation is carried out as it should be, the return to removal.