| 1. Grease a piston finger and the plug of a rod. |
| 2. Install the piston so that figures (5) and (6) were directed towards the movement and the pas tag a rod and a cover (9) was turned outside of the engine. |
|
| 3. Press a piston finger by hand. |
|
| 4. Insert a lock ring into a groove. Grease openings of cylinders, conrod necks, inserts and pistons with motive oil. |
|
| 5. Establish a mandrel (1) of piston rings and fill the piston in the cylinder on an arrow or figure on the piston in the direction of the movement. |
|
6. Establish conrod covers.
7. Turn a bent shaft and check ease of rotation. |