|
|
Mercedes S-Class W-1401991-1999 of releaseRepair and operation of the car |
|
|
Mercedes S-Class + Mercedes-Benz cars of the class S (W-140) + Operation manual - Routine maintenance Specifications Active system of the warning of the term of approach planned THAT (ASSYST) Schedule of routine maintenance General information on control Check of levels of liquids, control of leaks Check of a condition of tires and pressure in them, designation of tires and disks of wheels, rotation of wheels Replacement of motive oil and oil filter Check of the brake system Check of fuel system, replacement of the fuel filter Check of a state and replacement of hoses of a motive compartment, localization of leaks Check of a condition of ridge belts of the streaming drive of auxiliary units Check of functioning of the cooling system and frost resistance of cooling liquid, liquid replacement Check of a condition of system of production of the fulfilled gases Check of the ATF level, replacement of the AT filter Visual check of tightness of automatic transmission Check of a condition of components of a suspension bracket and steering Check of a condition of protective covers of power shafts Check of the air conditioning system Lubricant of limiters of doors and cylinders of locks Visual control of a seat belt and block of a safety cushion Check of operability of headlights and horn Check of a state, adjustment and replacement of brushes of screen wipers Check of a condition of the battery, care of it and charging Replacement of the saloon filter Replacement of brake fluid Check and replacement of spark plugs, check of a condition of high-voltage wires (petrol models) + Engine + Cooling systems, heating + Power supply system and release + Engine electric equipment + Gear shifting box + Automatic transmission + Coupling + Brake system + Suspension bracket and steering + Body + Onboard electric equipment |
General information on control The term "control" is used in this manual rather for designation of a complex of procedures, than one separate procedure. If from the moment of purchase of the car the schedule of routine maintenance is strictly observed, frequent inspections of level of liquids and a state subject to the increased wear of components will be carried out as it is offered in this manual, the engine will long remain in the good working condition, and need for carrying out any additional work will be minimized. Is more often, however, happens so that the engine works inefficiently owing to neglect with regular service. Even more often it happens upon purchase of the used car which owners did not trouble themselves frequent and regular checks and service. In this case, besides performance of ordinary procedures for routine maintenance, it will be necessary to make setup of the engine. The first step in any procedure of control or diagnostics for the purpose of improvement of operation of the engine is check of extent of compression in cylinders. Check of a compression (address the Head Dvigatel) will help to define a condition of internal components of the engine and has to serve as the index when carrying out control and repair. If, for example, check of extent of compression indicates serious internal wear of the engine, usual control will not help to improve its work and will be waste of time and money. As the procedure of check of extent of compression is extremely important, the expert owning the equipment which is specially intended for this purpose has to see off it. Reduction of the engine in the good working condition most often requires performance of the following procedures. Minimum settings General settings In addition to the settings listed in the previous list: |
|