|
|
Mercedes S-Class W-1401991-1999 of releaseRepair and operation of the car |
|
|
Mercedes S-Class + Mercedes-Benz cars of the class S (W-140) + Operation manual - Routine maintenance Specifications Active system of the warning of the term of approach planned THAT (ASSYST) Schedule of routine maintenance General information on control Check of levels of liquids, control of leaks Check of a condition of tires and pressure in them, designation of tires and disks of wheels, rotation of wheels Replacement of motive oil and oil filter Check of the brake system Check of fuel system, replacement of the fuel filter Check of a state and replacement of hoses of a motive compartment, localization of leaks Check of a condition of ridge belts of the streaming drive of auxiliary units Check of functioning of the cooling system and frost resistance of cooling liquid, liquid replacement Check of a condition of system of production of the fulfilled gases Check of the ATF level, replacement of the AT filter Visual check of tightness of automatic transmission Check of a condition of components of a suspension bracket and steering Check of a condition of protective covers of power shafts Check of the air conditioning system Lubricant of limiters of doors and cylinders of locks Visual control of a seat belt and block of a safety cushion Check of operability of headlights and horn Check of a state, adjustment and replacement of brushes of screen wipers Check of a condition of the battery, care of it and charging Replacement of the saloon filter Replacement of brake fluid Check and replacement of spark plugs, check of a condition of high-voltage wires (petrol models) + Engine + Cooling systems, heating + Power supply system and release + Engine electric equipment + Gear shifting box + Automatic transmission + Coupling + Brake system + Suspension bracket and steering + Body + Onboard electric equipment |
Check of a condition of ridge belts of the streaming drive of auxiliary units Check of a belt of the streaming drive of auxiliary units Schemes of laying of a belt of the streaming drive of auxiliary units The scheme of laying of a belt of the streaming drive of auxiliary units on the S280 and S320 modelsThe scheme of laying of a belt of the streaming drive of auxiliary units on the S420 and S500 models
The scheme of laying of a belt of the streaming drive of auxiliary units on the S600 models
The scheme of laying of a belt of the streaming drive of auxiliary units on the S300TDI models
Fingers (and using a small lamp if it is necessary) walk on all length of a belt, feeling on existence of cracks and stratifications. Also check whether is not present on a belt of attritions and sites, zapolirovanny to gloss. The belt has to be examined on both sides that means need of its twisting for check of a condition of inner side. Be in passing convinced of lack of a rust, cracks and agnails on pulleys. On a working surface of a belt existence of superficial perpendicular cracks is allowed. If these cracks do not overstep the bounds of one edge and not really deep, to replace a belt there is no need. Check of a belt of the drive of auxiliary units
The tension of a ridge belt is made automatically. It is necessary to check periodically a condition of a belt, and at detection of defects, to replace a belt. The tension of a belt is carried out by an automatic natyazhitel and does not need check.
The tension of a belt can be checked by strong pressing for it by a thumb and definitions of degree of its deflection. Measure the size of a deflection by a ruler. If the distance between centers of pulleys makes from 180 to 280 mm, then the size of a deflection has to equal 6 mm. If the distance between centers of pulleys is in limits between 300 and 400 mm, the deflection has to be 13 mm. In the presence of one or several of the specified damages maple the belt needs to be replaced with new. |
|