Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car

Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
- Engine
   Check of a compression in engine cylinders
   Check of the engine by means of the vacuum gage
   Belt of the streaming drive of auxiliary units
   + 6-cylinder petrol engines (M104.944 and M104.990/994)
   + 8-cylinder petrol engines (M119.970/981 and M119.971/981)
   + 12-cylinder petrol engines (M120.980/982)
   - 6-cylinder diesel engines (OM603.971)
      The air cleaner - installation details
      Replacement of a belt of the drive of the generator
      Removal and installation of a natyazhitel of a belt of the drive of the generator
      Final collector - installation details
      GRM drive chain cover
      Camshaft
      Removal and installation of a head of the block of cylinders
      Verification of the control provision of the camshaft
      Replacement of a chain of the GRM drive
      The GRM drive - the general information, service of components
      Natyazhitel of a GRM drive chain - an installation detail
      Removal and installation of pistons
      Check of a state and replacement of rods
      Measurement of diameters of cylinders
      Removal and installation of sleeves of cylinders
      Check of a condition of a bent shaft
      Removal and installation of an asterisk of a bent shaft
      Removal and installation of the pallet of a case of the engine
      The oil level sensor switch - installation details
      Replacement of a chain of the drive of the oil pump
      Removal and installation of the oil pump
      Removal and installation of the case of an oil filter
   + 6-cylinder diesel engines (OM606.961)
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of a natyazhitel of a belt of the drive of the generator

Removal

Details of installation of a natyazhitel of a belt of the drive of the generator


A — Natyazhitel of the 1st version 355 — the Cover 356 — the Bolt 357 — Lock laying 360 — the Tension lever 362 — the Plug 30 — the Finger	In — the Tension device of the 2nd version 356a — the Bolt 360a — the Tension lever With — Natyazhitel of the 3rd version 2 — the Bolt 4 — the Plug 9 — the Cover a — Consolidation

PERFORMANCE ORDER

1. Remove the fan coupling.
2. Remove a fan casing.
3. Take off a generator drive belt.
4. Vypressuyte cover (368).
5. Shoot a tension video (366).
6. Turn off a pulley (346) of the pump of the cooling system.
7. Unscrew the shock-absorber (370).
8. Turn off a nut (378) and disconnect a tension spring (376).
9. Remove a forward cover (355).
10. Turn off a bolt (356) and remove the tension lever (360).
11. Remove a finger (360).
12. Turn off a bolt (356a) and remove the tension lever (360a).
13. Remove a forward cover (9).
14. Turn off a bolt (2) and remove the tension lever.

Installation

Installation is carried out as it should be, the return to removal.