Replacement of a belt of the drive of the generator
Removal Details of installation of a belt of the drive of the generator
|
|
|
1. Weaken a casing of the fan and fix it over the fan.
2. Remove the fan coupling.
3. Weaken a generator drive belt.
4. Turn off a nut (378), a bolt (375) and take off a generator drive belt.
5. Check a belt for absence of damage. |
|
Installation Scheme of laying of a belt of the drive of the generator
|
|
|
1 — the Tension roller
2 — the Bent shaft
3 — the conditioner Compressor
5 — the Generator |
7 — the Pump of the amplifier of steering
7/1 — the Directing roller
8 — the cooling system Pump |
Installation is carried out as it should be, the return to removal. Belt length: without conditioner - 2080 mm, with the conditioner - 2145 mm.
|