|
1. Remove a forward wheel.
2. Screw a bolt (48a) of fastening of a wheel.
3. Block a forward brake disk a brake support, having pressed a brake pedal.
4. Uncover (9e) naves.
5. Turn off a nut (9d).
6. Attach the indicator (022) with a support (015).
7. Adjust a gap in the wheel bearing rotation of a nut (shooter) in the necessary direction. The nominal size of a gap in the bearing of a forward wheel makes 0.01-0.02 mm.
8. Tighten a bolt (91) and double-check a gap.
9. Press a brake pedal several times. |