1 — the Top compression ring 2 — the Lower compression ring 3 — the Oil scraper ring
4 — the Spiral spring of a dilator 8 — the Spring ring of a dilator 10 — Nippers
PERFORMANCE ORDER
1. Measure gaps between rings and pistons and gaps in locks of rings (see Specifications). 2. Remove piston rings by means of nippers (10). 3. Measure width of piston rings. 4. Establish piston rings only with the identified width. 5. Establish rings by a tag of "TOP" up. 6. Establish a ring (8) of a spring by the lock opposite to the lock of an oil scraper ring (3) (on 180 °).