Removal and installation of the accumulator of pressure of a hydraulic actuator of a back suspension bracket (model with a code 217a "A self-regulating back suspension bracket with ADS" and a code 480 "Management of clearance of a back suspension bracket")
Removal
Details of installation of the accumulator of pressure of a hydraulic actuator of a back suspension bracket
A — the Accumulator on the right on models with a code 480 In — the Arrangement of the right accumulator on models with a code 217a
PERFORMANCE ORDER
1. Merge liquid from system. 2. Disconnect the forcing (S1), (R4) pipelines from the spring drive. 3. Remove an exhaust pipe from arms on the bottom. 4. Remove both guides of back wheel arches. 5. Turn off nuts (4f) and remove the accumulator (4).
Installation
Installation is carried out as it should be, the return to removal.