Mercedes S-Class W-140

1991-1999 of release

Repair and operation of the car


Mercedes S-Class
+ Mercedes-Benz cars of the class S (W-140)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Gear shifting box
+ Automatic transmission
+ Coupling
- Brake system
   Specifications
   Arrangement of components of the ASR/ETS traction control system
   Arrangement of components of the amplifier of emergency brake application (BAS)
   Arrangement of components of the ESP system
   Dismantling and assembly of the "Tandem" main brake cylinder (MBC) (model 140.028/032/033/135)
   Removal, installation and check of serviceability of functioning of the servo-driver of the vacuum amplifier of brakes
   Removal and installation of a brake support
   Check of thickness of a brake disk and overlays of brake shoes
   Removal and installation of blocks of the parking brake
   Removal and installation of a forward cable of the drive of the parking brake
   Adjustment of the parking brake
   Wheel ABS sensors - installation details
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment






Removal and installation of a forward cable of the drive of the parking brake

Removal

Removal and installation of a forward cable of the drive of the parking brake


 PERFORMANCE ORDER

1. Remove a heat-shielding guard of system of release.
2. Remove a returnable spring (94).
3. Weaken an adjusting bolt (89).
4. Disconnect a cable (85) from the intermediate lever (91) and the bottom of the car. For a detachment use a key (043).
5. Remove the lower cover of the dashboard.
6. Disconnect a cable (85) from a pedal (75).

Installation

Installation is carried out as it should be, the return to removal. Make adjustment of the parking brake.